BCM Vertical Grip Mod 3 for Picatinny
Mix and match across the range: 2 items save 5%, 3 save 10%, 4 or more save 15% on your whole basket.
Mounts directly to 1913 Picatinny rail sections, including UK straight-pull AR-15 builds. Will not fit an M-LOK handguard — the M-LOK version is a separate product. Requires a T15 Torx driver, sold separately.
Not sure it fits your rifle? Ask us before you order
The BCM Vertical Grip Mod 3 is a low-profile vertical foregrip for AR-15 and M4 rifles, mounting directly to any 1913 Picatinny rail section.
A short vertical grip that stays out of the way — this is the direct-mount Picatinny version, not the M-LOK one.
The BCM VG-1913-Mod-3 uses Bravo Company USA's patented direct-mount Picatinny 1913 interface (US Patent 9,709,358), designed as a rigid, light and economical way to hang a vertical grip or hand stop off a rail without a bulky separate clamp. The grip body is short: low-profile length for increased mobility and a decreased snag factor, so it will not catch on a sling, a plate carrier or the edge of a barricade.
The forward angle increases the rigidity of the forearm while giving a more natural wrist angle, and the grip can be mounted in reverse to change how it loads when you grab handguard and grip together. Flat sides with an aggressive texture give better yaw control — the rifle stops rolling in the hand under recoil. It weighs 1.9 oz (54 g). Made in the U.S.A. from high-quality impact-resistant polymers.
This is the Picatinny version. It mounts directly to any 1913 Picatinny rail section — a quad rail, or a rail ladder fitted to a free-float tube — and it will not fit an M-LOK handguard. Ordering the wrong interface is the easiest mistake to make here, so check the handguard before you buy: if the slots are elongated M-LOK cut-outs rather than a ladder of square Picatinny teeth, you want the M-LOK version of the same grip. Fitting needs a T15 Torx driver, sold separately, torqued to approximately 18–20 in-lb (2.0–2.3 Nm) plus a quarter turn. It suits a UK straight-pull AR-15 as readily as any other AR-pattern build — a defined support-hand position is what makes the hold repeat after every cycle.
| Platform | AR-15 / M4 |
|---|---|
| Fits | Any 1913 Picatinny rail section |
| Type | Vertical foregrip, reversible |
| Material | High-impact polymer |
| Finish | Black, Flat Dark Earth |
| Weight | 1.9 oz (54 g) |
| Mount interface | Direct-mount 1913 Picatinny, US Patent 9,709,358; T15 Torx, approx. 18–20 in-lb (2.0–2.3 Nm) plus a quarter turn |
| Made in | USA |
| Brand | Bravo Company USA |
| MPN | BCM-VG-1913-MOD-3-BLK · BCM-VG-1913-MOD-3-FDE |
Short, solid and out of the way. Order the Vertical Grip Mod 3 today — imported from the USA with all duties paid by us and dispatched tracked from the UK in 7–10 business days, with nothing to pay on delivery.
Explore more: Gun Grips & Foregrips, AR-15 Parts & Accessories or browse all Bravo Company USA.
| Platform | AR-15 / M4 |
|---|---|
| Fits | Any 1913 Picatinny rail section |
| Type | Vertical foregrip, reversible |
| Material | High-impact polymer |
| Finish | Black, Flat Dark Earth |
| Weight | 1.9 oz (54 g) |
| Mount interface | Direct-mount 1913 Picatinny, US Patent 9,709,358; T15 Torx, approx. 18–20 in-lb (2.0–2.3 Nm) plus a quarter turn |
| Made in | USA |
| Brand | Bravo Company USA |
| MPN | BCM-VG-1913-MOD-3-BLK · BCM-VG-1913-MOD-3-FDE |
| Category | Foregrip |
| Barcode | 812526020154 |
£5 tracked UK delivery on every order via Royal Mail Tracked 24. Our products are ordered in from the manufacturer rather than held in UK stock, so please allow 7 to 10 business days (Monday to Friday, excluding bank holidays) from the date of your order for it to reach you. Tracking details are emailed on dispatch. UK delivery only.
You have 30 days from receiving your order to cancel it for any reason, then 14 days to send it back unused and in its original packaging. Faulty, damaged or incorrect items are replaced or refunded and we cover reasonable return postage. Refunds go back to your original payment method within 14 days of receiving the return.
This is the Picatinny one. It mounts directly to any 1913 Picatinny rail section and will not fit an M-LOK handguard. The same grip with an M-LOK interface is the <a href="/products/bcm-vertical-grip-mod-3-m-lok">Vertical Grip Mod 3 for M-LOK</a>. Look at your handguard before ordering: elongated oval cut-outs are M-LOK, a ladder of square teeth is Picatinny.
The grip can be fitted either way round. Run it forward-raked and it works as a conventional vertical grip you pull back into the shoulder; run it reversed and it gives a different loading point when you grab the handguard and the grip together. Neither is right or wrong — fit it one way, shoot a few strings, and try the other before you decide.
Bravo Company USA quotes 1.9 oz (54 g), so it is a negligible addition to a handguard. Fitting needs a T15 Torx driver, which is not included, torqued to approximately 18–20 in-lb (2.0–2.3 Nm) plus a quarter turn. Re-check the fastener after your first range session, as with any newly fitted accessory.
The flat sides carry an aggressive texture and give better yaw control, which is Bravo Company USA's way of saying the rifle is less able to roll in your hand under recoil. A round post lets the gun rotate slightly; flats give the palm something to resist against. The short overall length is deliberate too — it is there to be indexed against, not wrapped in a full fist.
Grips are dispatched from the United Kingdom with £5 tracked UK delivery in 7–10 business days, and tracking is emailed to you on despatch. If it turns out not to suit your handguard or your hold, see our returns policy or <a href="/pages/contact">contact us</a> and we'll help sort it.
7 to 10 business days from the date of your order. Every order is sent Royal Mail Tracked for a flat £5 and you receive tracking details by email when it is dispatched.
Yes. We list only genuine parts and optics from the brands shown, ordered in from the manufacturer for your order.
Compatibility notes on this page come from the manufacturer. If you are unsure, email us with your make and model before ordering and we will check rather than guess.
Yes. Bundle & Save applies automatically in your basket: 5% off when you buy 2 items, 10% off at 3 items and 15% off at 4 or more. It works across the whole range, so you can mix and match, and there is no code to enter.
Yes — you have 30 days from delivery to cancel for any reason, as long as the item is unused and in its original packaging. See our returns policy for the details.
Why Onyx Armaments
