BCM KMR ALPHA KeyMod Handguard for AR-15
Mix and match across the range: 2 items save 5%, 3 save 10%, 4 or more save 15% on your whole basket.
Fits AR-15/M4 upper receivers, including UK straight-pull AR-15 builds. Clears barrels up to 1.0" (25.4 mm) diameter and requires a low-profile gas block. Supplied with a steel barrel nut, which replaces the existing barrel nut. Accessories must be KeyMod — M-LOK hardware does not fit.
Not sure it fits your rifle? Ask us before you order
The BCM KMR ALPHA is a free-float KeyMod handguard for AR-15 and M4 rifles, machined entirely from aluminium with a continuous 1913 Picatinny top rail.
Long, light and rigid — the KMR ALPHA is the full-length free-float tube for shooters who want the support hand out at the muzzle and the barrel untouched.
The ALPHA is the all-aluminium generation of BCM's KMR, and the numbers are the argument: 8.6 oz (245 g) for a 15" tube and 9.9 oz (280 g) for a 17". Very little else gives you that much rail length for that little mass. BCM's proprietary mounting, indexing and lock-up system mitigates movement at the 12 o'clock rail caused by heat travelling through the barrel nut, which is what keeps a long top rail honest between the receiver sight and a muzzle-end backup.
At these lengths the free-float principle earns its keep twice over. The support hand goes right out to the muzzle for maximum control of the rifle, and a bipod or barricade stop can sit at the very front — and none of that load reaches the barrel. On a UK straight-pull AR-15 built for deliberate, aimed shooting from support, a 15" or 17" free-float tube is one of the highest-value changes you can make to the front end.
KeyMod slots run at 3, 6 and 9 o'clock with four further offset positions between the clock faces, so accessories can be indexed exactly where the hand wants them rather than where the slot happens to be. The handguard flares forward approximately ¼" at 3 and 9 o'clock, and a BCM KeyMod sling mount is supplied.
Fits AR-15/M4 upper receivers, including UK straight-pull AR-15 builds, and clears barrels up to 1.0" (25.4 mm) in diameter. At 15" and 17" these are long tubes: they need a low-profile gas block and a barrel long enough that the handguard does not overhang the muzzle device, so measure from the receiver face to the muzzle before ordering. Fitting replaces the barrel nut with BCM's own, so it is an armourer's job rather than a slip-on swap. Accessories must be KeyMod — M-LOK hardware will not fit these slots, and if your kit is M-LOK the MCMR is the equivalent tube in that interface.
| Platform | AR-15 / M4 |
|---|---|
| Fits | Mil-spec upper receivers; barrels up to 1.0" (25.4 mm) diameter |
| Type | Free-float KeyMod handguard with full-length 1913 top rail |
| Material | Aluminium |
| Finish | Hard-coat anodised |
| Weight | 15" 8.6 oz (245 g) · 17" 9.9 oz (280 g); with mounting hardware 11 oz (310 g) and 12.3 oz (350 g) |
| Length | 15.0" (381 mm) · 17.00" (432 mm), measured to the flare |
| Mount interface | KeyMod slots at 3, 6 and 9 o'clock plus four offset positions; continuous 1913 Picatinny top rail |
| Brand | Bravo Company USA |
| MPN | BCM-KMR-A15-556-BLK · BCM-KMR-A17-556-BLK |
Reach the muzzle without touching the barrel. Order the KMR ALPHA today — imported from the USA with all duties paid by us and dispatched tracked from the UK in 7–10 business days, with nothing to pay on delivery.
Explore more: AR-15 Parts & Accessories, Bipods & Mounts or browse all Bravo Company USA.
| Platform | AR-15 / M4 |
|---|---|
| Fits | Mil-spec upper receivers; barrels up to 1.0" (25.4 mm) diameter |
| Type | Free-float KeyMod handguard with full-length 1913 top rail |
| Material | Aluminium |
| Finish | Hard-coat anodised |
| Weight | 15" 8.6 oz (245 g) · 17" 9.9 oz (280 g); with mounting hardware 11 oz (310 g) and 12.3 oz (350 g) |
| Length | 15.0" (381 mm) · 17.00" (432 mm), measured to the flare |
| Mount interface | KeyMod slots at 3, 6 and 9 o'clock plus four offset positions; continuous 1913 Picatinny top rail |
| Brand | Bravo Company USA |
| MPN | BCM-KMR-A15-556-BLK · BCM-KMR-A17-556-BLK |
| Category | Handguard |
| Barcode | 812526020420 |
£5 tracked UK delivery on every order via Royal Mail Tracked 24. Our products are ordered in from the manufacturer rather than held in UK stock, so please allow 7 to 10 business days (Monday to Friday, excluding bank holidays) from the date of your order for it to reach you. Tracking details are emailed on dispatch. UK delivery only.
You have 30 days from receiving your order to cancel it for any reason, then 14 days to send it back unused and in its original packaging. Faulty, damaged or incorrect items are replaced or refunded and we cover reasonable return postage. Refunds go back to your original payment method within 14 days of receiving the return.
No. KeyMod and M-LOK are different interfaces and the hardware is not interchangeable. If your lights, grips and sling mounts are M-LOK, either buy KeyMod versions or choose BCM's <a href="/products/bcm-mcmr-m-lok-handguard">MCMR</a>, which is the same free-float concept with M-LOK slots. A short Picatinny rail section in KeyMod will let you carry Picatinny accessories on the KMR.
Both are full-length tubes and both need a low-profile gas block. Measure from the upper receiver face to the rear of the muzzle device: the handguard must end short of it. A 16" barrel commonly takes the 15"; the 17" is for 18" and longer barrels, or a 16" barrel with a pinned and welded device where the numbers work out. If the tube would overhang the muzzle device, go shorter.
The 15" handguard alone is 8.6 oz (245 g) and 11 oz (310 g) with its mounting hardware. The 17" is 9.9 oz (280 g) alone and 12.3 oz (350 g) fitted. That is light for the length — a quad rail of comparable length is substantially heavier because the Picatinny is machined into all four faces.
The tube flares out approximately ¼" at the 3 and 9 o'clock positions towards the front. It gives the support hand a positive index near the muzzle end without adding a separate hand stop, so you get the same hand placement shot after shot.
Handguards are sent from the United Kingdom with £5 tracked UK delivery in 7–10 business days, and you will get tracking by email when it ships. If a part turns out to be the wrong fit, see our returns policy or <a href="/pages/contact">contact us</a> and we will help sort it.
7 to 10 business days from the date of your order. Every order is sent Royal Mail Tracked for a flat £5 and you receive tracking details by email when it is dispatched.
Yes. We list only genuine parts and optics from the brands shown, ordered in from the manufacturer for your order.
Compatibility notes on this page come from the manufacturer. If you are unsure, email us with your make and model before ordering and we will check rather than guess.
Yes. Bundle & Save applies automatically in your basket: 5% off when you buy 2 items, 10% off at 3 items and 15% off at 4 or more. It works across the whole range, so you can mix and match, and there is no code to enter.
Yes — you have 30 days from delivery to cancel for any reason, as long as the item is unused and in its original packaging. See our returns policy for the details.
Why Onyx Armaments
